CB964DB is SATA to CFast Card adapter, providing a set of standard 7 +15 pin SATA connector, a set of 7pin SATA signal connector on the host connection, and two sets of CFast 24pin connector on the CFast storage devices connection. When assembled, the two CFast SSD can operate independently and can install the operating system in the CFast SSD, such as DOS, Windows 95, 98, XP, 2000, Vista,, Win 7, the Linux, Unix, etc.
CB964DB adapter allows any of a group of the CFast SSD as the system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices.
.
1. Full Complaint with SATA revistion2.6
2. Compliant with CFAST specification revistion 1.0
3. 3.3 Volt Power supply
4. Support following form factors of CFast Card :
TYPE I CFast Storage Card Physical Specifications :
| Length : | 36.4 ± 0.15 mm |
| Width : | 42.80 ± 0.10 mm |
| Thickness Including Label Area : | 3.3 ± 0.10 mm |
Type II CFast Storage Card Physical Specifications :
| Length : | 36.4 ± 0.15 mm |
| Width : | 42.80 ± 0.10 mm |
| Thickness Including Label Area : | 5.0 ± 0.10 mm |
※ Serial ATA Reversion 2.6 -------------------------------------------------------> February 2007
※ ATA/ATAPI-7 --------------------------------------------------------------------> April 2004
The adapter connects to the Host PC in the same way that a 2.5 SFF SSD drive is connected using a SATA cable. It may be used in any application where a SFF SSD drive may be used:
1. desk-top PC
2. Internet Appliances
3. Kiosks
4. Industrial Computers
5. Routers
6. Firewalls
Datasheet Download :
